Drive In Racking System
Continuous lane storage maximizing floor utilization up to 85%. Ideal for homogeneous bulk inventory and FMCG cold storage in Sadat City.
Explore Drive In Racking
Explore our core engineered high-density racking configurations designed for maximum ROI in cold storage, manufacturing, and fast-moving consumer goods.
Continuous lane storage maximizing floor utilization up to 85%. Ideal for homogeneous bulk inventory and FMCG cold storage in Sadat City.
Explore Drive In Racking
Semi-automated radio shuttle pallet runner system providing rapid FIFO/LIFO turnover for high-bay Egyptian logistics hubs.
View Shuttle Racking
Multi-tier structural steel floors doubling overhead space for e-commerce picking, light manufacturing, and executive offices in Cairo.
View Steel Platforms
Rack-supported vertical floors tailored for dense small-parts storage, textile depots, and distribution centers across Borg El Arab.
View Mezzanine SystemsAs the Arab Republic of Egypt accelerates its strategic position under Egypt Vision 2030, the nation is rapidly establishing itself as the premier logistics gateway connecting Africa, the Middle East, and Europe. Massive investments in industrial infrastructure—spanning the Suez Canal Economic Zone (SCZONE), 6th of October City, 10th of Ramadan City, and the Cairo-Alexandria Logistics Corridor—have triggered an unprecedented demand for modern, high-capacity warehousing.
With industrial real estate rental costs rising rapidly in prime zones near Greater Cairo and Port Alexandria, logistics directors and industrial supply chain executives can no longer rely on expansive, low-density floor storage. Optimizing cubic volumetric utilization has become a critical financial metric. Drive In Racking Systems engineered by Guake Logistics Technology solve this exact structural challenge by eliminating traditional forklift aisles, converting up to 85% of dormant warehouse volume into actionable pallet capacity.
Forklifts drive directly into storage lanes, allowing 4 to 10+ pallets deep configuration per lane face.
Delivers the lowest cost-per-pallet position among all high-density structural racking designs.
A rigorous examination of cold-rolled structural steel profiles, load-bearing cantilever arms, guide rails, and stability bracing engineered to international safety standards.
Formed from premium Q235B and Q355B structural steel, our upright columns feature continuous omega-section cold-rolling with a pitch adjustment of 50mm or 75mm to withstand dynamic forklift impacts.
Heavy-gauge steel cantilever brackets are stamped in a single piece and wrap around upright frames, distributing vertical loading across multiple load points without structural shearing risks.
Cold-formed galvanized steel rails provide continuous horizontal guidance for timber, plastic, or metal pallets up to 1,500 kg capacity per level, ensuring zero pallet sag.
Depending on inventory velocity and perishable expiration dates, Guake engineers configure Drive-In systems into two distinct operational modes:
Forklifts enter and exit through the same front access aisle. The last pallet loaded into the lane is the first pallet retrieved. This configuration is widely deployed in raw material buffer storage, seasonal agriculture, and non-perishable chemical warehousing across Egypt.
Features dual access aisles—one for loading at the rear and one for retrieval at the front. Pallets travel continuously through the bay, supporting batch control and strict expiration date enforcement required by the Egyptian National Food Safety Authority (NFSA).
Ensuring your racking investment meets regional civil defense standards, seismic activity profiles, and extreme desert/coastal climate requirements.
Northern Egypt, Alexandria, and the Gulf of Suez fall within active seismic fault zones. Guake structural designs comply strictly with EN 15512 and FEM 10.2.02 seismic provisions, incorporating heavy-duty floor baseplates and expansion anchoring into high-strength concrete slabs.
Warehouse temperatures in Upper Egypt and Cairo can exceed 45°C. Our steel receives multi-stage phosphate washing and epoxy-polyester powder coating (60–80 microns), resisting oxidation, humidity, and chemical abrasion in coastal port facilities.
All component tolerances comply with the Egyptian Organization for Standardization and Quality (EOS). Structural layouts integrate clear aisle spacing and sprinkler system clearances mandatory for Egyptian Civil Defense fire inspection approval.
Direct OEM manufacturing from China's industrial steel hub delivering unbeatable cost efficiency, rapid ocean freight turnaround, and flawless customs processing.
Operating from a 20,000+ m² modern production facility in Linyi, Shandong Province, Guake Logistics Technology (Shandong) Co., Ltd. combines automated continuous roll-forming lines, robotic MIG welding cells, and automated powder coating systems. By sourcing prime raw steel directly from top-tier state mills (such as Shougang and BaoSteel), we maintain strict structural integrity while delivering direct-from-factory pricing that saves Egyptian enterprises 25% to 40% compared to European brokers.
Our dedicated export engineering department prepares full CAD/BIM structural drawings, installation manual packages, and container loading schemes optimized for 40ft High-Cube ocean containers.
Navigating Egyptian customs requirements requires specialized export capability. Guake is fully experienced with the Nafeza Single Window System and the Advanced Cargo Information (ACID) process mandatory across Egyptian sea ports (Alexandria, Ain Sokhna, Port Said, and Damietta).
Custom-built drive-in racking solutions tailored to the operational realities of key Egyptian economic sectors.
Egypt is the world's leading exporter of fresh citrus and dates. Cold storage facilities in 6th of October City and Sadat City require operating temperatures down to -25°C. Cooling energy costs per cubic meter are extremely high.
Guake Impact: Drive-in racking minimizes refrigerated room footprint, cutting electrical power consumption by up to 35% per pallet position.
Distribution hubs in 10th of Ramadan City process massive volumes of uniform packaged beverages, cooking oils, and dry foods serving Greater Cairo's 22 million consumers.
Guake Impact: Lane depths up to 8 pallets deep allow high-speed replenishment during peak consumer demand cycles.
Pharmaceutical manufacturing facilities in Badr City and Obour City store uniform drums and intermediate bulk containers (IBCs) requiring secure, non-cluttered storage layout.
Guake Impact: Floor-anchored guide rails prevent forklift contact with structural racks, eliminating collision hazards.
Customs-bonded warehouses in Sokhna Port and East Port Said handle global re-export goods requiring high-bay storage before maritime vessel loading.
Guake Impact: High-bay structural designs up to 11 meters clear height maximize vertical volume within bonded zone boundaries.
Compare key operational and structural parameters to select the optimal racking configuration for your Egyptian facility.
| Racking System Type | Storage Density | Pallet Selectivity | Inventory Flow | Cost per Pallet | Cold Room Suitability |
|---|---|---|---|---|---|
| Drive In Racking | Very High (85%) | Low (Per Lane) | LIFO / FIFO | Lowest | Excellent |
| Radio Shuttle Racking | Maximum (90%) | Medium (Per Lane) | FIFO / LIFO | Medium-High | Superior |
| Push Back Racking | High (75%) | Medium (2-5 Deep) | LIFO | Medium | Good |
| Selective Pallet Racking | Standard (45%) | 100% Direct | FIFO / LIFO | Low | Moderate |
| Steel Structure Mezzanine | Floor Area Expansion | 100% Manual/Floor | Flexible Flow | Custom Area Basis | Area Dependent |
From initial site survey to on-site assembly, Guake manages your complete project lifecycle with single-point accountability.
Send us your building DWG/PDF drawings. Our structural engineers formulate a 3D layout plan matching your floor slab tolerances and forklift specs within 24 hours.
Automated continuous roll-forming of uprights, stamped cantilever arms, and powder coating under ISO 9001:2015 quality control oversight.
Guake generates mandatory ACID numbers via Nafeza, handles container loading optimization, and ships directly to Alexandria or Ain Sokhna ports.
We provide detailed 3D installation drawings, bolt torque specifications, and optional field supervision to ensure complete structural safety clearance.
Direct technical answers addressing structural customization, customs clearance, shipping timelines, and site installation in Egypt.
Drive In Racking is optimal when your warehouse handles homogenous products with large pallet quantities per SKU (such as cold storage dates, citrus, beverages, or raw polymer materials). If warehouse footprint costs in areas like 6th of October City or 10th of Ramadan are high, Drive In Racking increases floor space utilization from 45% (selective racking) up to 85% by eliminating operating aisles.
Guake Logistics Technology has extensive experience exporting heavy industrial machinery and racking to Egypt. Once your proforma invoice is finalized, your Egyptian importer inputs our manufacturer details into the Nafeza Single Window Platform to generate the Advanced Cargo Information (ACID) number. We include this ACID number on all shipping documents (Bill of Lading, Commercial Invoice, Packing List, Certificate of Origin) prior to vessel departure from Qingdao Port.
We manufacture upright columns and structural members using high-tensile Q235B and Q355B cold-rolled steel. For installations in northern Egypt or near coastal fault zones (Alexandria, Suez), structural calculations incorporate European seismic standards (EN 15512 and FEM 10.2.02). Baseplates and expansion anchors are calculated based on your concrete slab compressive strength (e.g., C25/C30 grade concrete).
Yes. Drive In Racking lanes are specifically dimensioned to match your exact forklift overall width and mast height. To prevent accidental column strikes, floor-anchored steel guide rails (either structural angle iron or heavy-duty tubular steel) are bolted inside each lane. Column guards and corner protection wrap around exterior upright frames for maximum safety.
Manufacturing lead time at our Shandong facility typically takes 15 to 20 business days depending on project tonnage. Ocean freight transit from Qingdao Port directly to Alexandria Port, Ain Sokhna Port, or Port Said takes approximately 22 to 28 days. In total, expect delivered goods at your site within 45 to 55 days from contract deposit.
Guake provides full engineering documentation with every shipment, including detailed CAD assembly drawings, exploded 3D views, component piece lists, and fastener torque requirements. For large turnkey projects in SCZONE or Greater Cairo, we can dispatch qualified installation supervisors to oversee your local assembly crew and perform final load testing certification.
Yes. We offer fully customizable thermosetting epoxy powder coating finishes matching RAL color standards (e.g., RAL 5005 Blue for uprights, RAL 2004 Orange for beam levels and cantilever arms). Pre-galvanized components are also available for ultra-high humidity environments or sub-zero cold storage facilities.
All Guake racking systems carry a 10-year structural integrity warranty against manufacturing defects. Every project is accompanied by structural design calculations, material test certificates (MTC) proving steel tensile yield strength, and ISO 9001:2015 quality assurance certificates required by Egyptian civil engineering auditors.
Select from our complete factory-direct range of specialized pallet racking, automated shuttle systems, vertical platforms, and heavy material handling units.
Nested cart gravity system storing 2 to 5 pallets deep per lane with high selectivity.
View Push Back Racking
Semi-automated radio-controlled shuttle for high-density cold storage depots.
View Radio Shuttle
Motorized mobile bases moving on floor rails, opening single access aisles on demand.
View Mobile Racking
Multi-tier structural floor space doubling office, picking, or assembly area.
View Mezzanines
Cantilever and heavy-duty arm storage for pipes, steel bars, and long industrial profiles.
View Special Racking
Selective beam pallet racking offering 100% direct access for multi-SKU logistics.
View Heavy-Duty Racking
Unobstructed front arm access for timber, aluminum extrusions, and heavy sheet materials.
View Cantilever Racks
Fully automated crane and stacker storage systems for zero-labor intelligent warehousing.
Request Systems CatalogSend your floor plan, clear height dimensions, and pallet unit load specifications to our senior structural engineering team. Receive a comprehensive CAD layout design, structural FEA calculation, and transparent factory quotation within 24 hours.